Xerox Nuvera 100, Software Manual

Page: 351 / 498

Specifying print format parameters
Using LCDS Print Description Language 4-111
VFU command example
Following is an example of how to use the VFU command.
In the following example, top of form is assigned to line number 5
and bottom of form is assigned to line number 55. Channels 1, 2,
and 12 have been assigned line numbers.
Assume the printing system is printing a report and the current
line number is 11.
• If a Skip To Channel 1 And Print parameter is issued, a page
transition occurs. Printing begins on line 5 (assigned to
channel 1), which is the top of form on the new page.
• If a Skip to Channel 2 And Print parameter is issued when the
current line number is 11, the next line to be printed is line 15
of the current page. Lines 10, 15, 20, and so forth, are also
assigned to channel 2, but because the current line number is
11, the next consecutive line number assigned to channel 2
(greater than 11) is line 15.
• If a Skip To Channel 12 And Print parameter is issued, the
next line to be printed is line 55 of the current page.
V1: VFU ASSIGN=(1,5),
ASSIGN=(2,(10,15,20,25,30,35,40,45,50)),
ASSIGN=(12,55), TOF=5, BOF=55;