Xerox Nuvera 100, Software Manual

Page: 177 / 498

Specifying input parameters
Using LCDS Print Description Language 2-69
Options
Default EBCDIC
VOLUME UNPACK
Specifies the unpacking method of the input data when
unpacking is required.
Syntax VOLUME UNPACK = {NONE | T4X3 | T4X3H2 | UNIVAC}
Options
Default NONE
Table 2-77. VOLUME TCODE parameter options and definitions
Option Definition
tcode Type Specifies one of the following standard character sets for which type
assignments are defined by default:
•
ASCII
• BCD
• EBCDIC
• H2BCD
• H6BCD
• IBMCD
• PEBCDIC
By coding any one of the keywords, you are furnished with a set of character to
type assignments.
label Specifies an identified label of a TCODE parameter that defines a set of type
assignments.
Table 2-78. VOLUME UNPACK parameter options and definitions
Option Definition
NONE Does not perform the unpacking operation.
T4X3 or
T4X3H2 Specifies unpacking routines in which 6-bit characters are extracted and
restored as 8-bit bytes.
UNIVAC Specifies an unpacking routine used for UNIVAC tapes, although you can
specify any of these routines independent of the HOST type.