Xerox Nuvera 100, Software Manual

Page: 220 / 498

Using logical processing
3-40 Using LCDS Print Description Language
ROFFSET can also force an offset on either all copies of the
report or only the first copy. In conjunction with job offset control
(OFFSET parameter of the OUTPUT command), you can exert
extensive control over the offsetting function to build tailored, job
controlled stacks of output in your printer stacker tray.
ROFFSET command parameters
The following table summarizes the ROFFSET command
parameters.
The following section describes the syntax of the ROFFSET
command parameters and explains their options.
ROFFSET PASSES
Specifies which copy of a report in a collated print run will be
offset.
Syntax ROFFSET PASSES = {FIRST | ALL}
Options
Default ALL
Table 3-29. Summary of ROFFSET command parameters
Parameter Specifies Online Offline DJDE
ROFFSET PASSES Initiates an offset of specified copies of a report. Y Y N
ROFFSET TEST Defines a test expression for offsetting pages in the
stacker. Y Y N
Table 3-30. ROFFSET PASSES parameter options and definitions
Option Definition
FIRST Specifies that the satisfied criteria causes an offset only on the first pass of a
collated print run.
ALL Specifies that the satisfied criteria causes an offset on all passes of a collated
print run.