Xerox DocuColor 6060, Operator'S Manual

Page: 40 / 340

D O C U C O L O R
6 0 6 0
O P E R A T O R M A N U A L
1-10
A
B O U T
C
O L O R
P
R I N T I N G
Color Management
Since the color on a screen differs from the color produced by the press, it is
necessary to have a Color Management System (CMS). The CMS identifies and
bridges the gap between the RGB and CMYK color spaces belonging to your
monitor, press, and scanner. Mac and Mac OS compatible computers use the
Apple ColorSync CMS to implement and handle the profiles of these devices. For
Windows - based PCs, refer to your PC Operator Manual for the compatible CMS.
Without a color management system, one image will appear different when
reproduced on different devices due to inconsistencies in color gamuts.
A color management system helps you obtain more consistent results by aligning
the color gamuts used by different devices.
Halftone Dots and Screen Angles
Halftone Screens
To produce continuous tone images on an output device, bitmaps and process
color graphics must be broken into a series of dots of various sizes and colors.
This creates a halftone screen. Halftone screens combine cyan, magenta, yellow,
and black dots at different screen angles to form a four-color image. The
structure and patterns by which the colors are combined are the halftone
screens. When a certain color is required, the halftone screen determines the
dots to color, the color to use, and the degree to which each dot is colored. The
figure on the left illustrates a halftone screen.
105
o
90
o
75
o
45
o
0
o