Xerox DocuColor 6060, Operator'S Manual

Page: 306 / 340

D O C U C O L O R
6 0 6 0
O P E R A T O R M A N U A L
8-6
M
A I N T E N A N C E
KEY POINT:
Vigorously shake and/or slap the new cartridge with your hand
until the Dry Ink/Toner is completely loosened. To determine if the material is
loose, place your finger tips on the flat side of the gear cogs at the back of the
cartridge and turn the gear clockwise. When the gear turns freely, the material is
loose and the cartridge can be inserted into the compartment.
Figure 3. Turning the Cartridge Gear
6
To insert the cartridge into the compartment, align the arrow on the cartridge
with the unlocked padlock on the compartment and slide the cartridge into the
compartment.
CAUTION:
If more than one cartridge needs to be replaced at the same time,
ensure that the cartridges are replaced in their correct color locations. From left
to right, the cartridge colors are black, cyan, magenta, and yellow.
7
Rotate the cartridge clockwise until the arrow on the cartridge is aligned with the
locked padlock on the compartment.
Figure 4. Inserting a Cartridge
8
Close the Dry Ink/Toner compartment.