Xerox DocuColor 6060, Operator'S Manual

Page: 184 / 340

D O C U C O L O R
6 0 6 0
O P E R A T O R M A N U A L
4-80
S
C A N N E R
Transparency Options
Transparency Options allows you to choose one of the following:
• Transparency Set produces a single set of transparencies with a
designated number of sets of paper output. Only one set of transparencies is
produced regardless of the number of paper sets requested.
• Transparency Set + Dividers produces a single set of transpar
dividers with a designated number of sets of paper output. Only one set of
transparencies is produced regardless of the number of paper sets required.
• Dividers Only produces a continuous stream of dividers to be incorporated
into a job programmed for transparencies only. This is the option to choose if
you are running multiple sets of transparencies and require a divider to be
inserted between each set.
Off is the permanent default for Transparency Options. The default cannot be
changed in Tools Mode.
Transparencies can be run from any tray. If running Dividers, load the Dividers in
one tray and the transparencies in another tray. Select the appropriate trays for
each on the Transparencies Options screen.
NOTE:
Collated must be selected on the Basic Features screen for the
Transparency Options button to be selectable. The Transparency Options feature
cannot be used in combination with the Covers, Inserts, Booklet Creation, or
Poster features.