Xerox DocuColor 6060, Operator'S Manual

Page: 315 / 340

MA
IN
TEN
A
N
C
E
D O C U C O L O R
6 0 6 0
O P E R A T O R M A N U A L
8-15
M
A I N T E N A N C E
Replacing the Fuser Web
Two messages will display on the Touch Screen regarding the Fuser Web. The
first advises you that the web is almost used up and you should be sure to have a
new unit on hand. The second message displays when the Fuser Web is
completely used and you must replace it. When this message displays, the digital
press shuts down and will not print until the web is replaced.
WARNING:
The Fuser area is hot. Be careful when working in this
area to avoid injury.
Use the following procedure to replace the Fuser Web.
1
Open the front doors of the digital press.
2
Use handle 4 to pull out the Transfer Drawer.
3
Pull open the Fuser handle 4C.
4
Lift up handle 4d until it stops at the top of the Fuser.
Figure 15. Pull handle 4C Lift up handle 4d