Xerox DocuColor 6060, Operator'S Manual

Page: 212 / 340

D
O C U
C
O L O R
6 0 6 0 O
P E R A T O R
M
A N U A L
5-10
A
C C E S S O R I E S
Control Panel
Figure 8. HCS Control Panel
5 10 9
8
7
6
1 2 3 4
Name Function
1 Ready
Indicator The Ready Indicator blinks when the digital press is being initialized. The
Ready Indicator is constant when in use or in standby.
2 Table Down
Switch Press once to lower the elevator and unlock the front HCS door. Press
again to stop the elevator from lowering. If pressed while running a job,
all sheets in the paper path are delivered before the elevator will lower.
3 Ready To
Open Illuminates when the elevator has reached the down position and the
Stacker Door can be opened.
4 Please Wait Please Wait will illuminate while the elevator is in motion.
5 Fault Codes When there is a fault in the HCS, the Fault Code appears here. Refer to the
digital press Touch Screen for further information.
6 Main Tray Illuminates when paper is being delivered to the elevator tray. Blinks
when the cart is full or not in place. The indicator is OFF when the Stacker
is in standby mode.
7 Baffle Area Illuminates when paper is being stacked. Blinks when there is a jam. The
indicator is OFF when the Stacker is in standby mode.
8 Entry Blinks when there is a jam in baffle area 1. The indicator is OFF when the
Stacker is in standby mode. Refer to Jam Clearance in this section.
9 Top Tray Illuminates when in Top Tray Mode. Blinks when the tray is full. The
indicator is OFF when the Stacker is in standby mode.
10 Horizontal
Transport Blinks when there is a jam in the registration area or in the baffle areas.
The indicator is OFF when the Stacker is in standby mode. Refer to Jam
Clearance in this section