Xerox DocuColor 6060, Operator'S Manual

Page: 229 / 340

AC
CE
S
S
OR
IE
S
D
O C U
C
O L O R
6 0 6 0 O
P E R A T O R
M
A N U A L
5-27
A
C C E S S O R I E S
Maintenance
Do not clean any area inside the HCS. If the covers or Front Door require
cleaning, dampen a paper towel or soft, clean cloth with a liquid, nonabrasive
glass cleaner or water.
To avoid damage to the HCS, do not pour or spray the cleaner or water directly
onto the HCS. Always apply the liquid to the cloth first.
Do not use any other cleaners or solvents on the HCS or they may interact with
the paint on the covers, eventually causing the paint to peel.
Problem Solving
If, after following the recommended solutions, the problem persists, call for
assistance.
The Fault Codes described below appear on the HCS display panel.
Problem Cause Solution
Fault 052-311 Communication
problem • Cancel or save the job.
• Power off the digital press. Wait 15 seconds and power on.
Fault 212-252 HCS Flipper wheel
problem. • Open Top Cover.
• Clear the paper path.
• If the fault code is still displayed, save or cancel the job, then
power off the digital press. Wait 15 seconds and power on.
Fault 212-253 HCS Flipper wheel
problem. • Open Top Cover.
• Clear the paper path.
• If the fault code is still displayed, save or cancel the job, then
power off the digital press. Wait 15 seconds and power on.
Fault 212-251 HCS Stacking
Height problem • Open Top Cover.
• Clear the paper path.
• If the fault code is still displayed, save or cancel the job, then
power off the digital press. Wait 15 seconds and power on.
Fault 212-254 HCS Registration
problem • Open Top Cover.
• Clear the paper path.
• If the fault code is still displayed, save or cancel the job, then
power off the digital press. Wait 15 seconds and power on.
Ready Indicator
does not illuminate No power • Check the power cord connected to the power source.
• Check that the GFI circuit breaker is not tripped (rear cover).
• Check that the main switch is on.
Poor Stacking Mixed sizes of
paper Run separate jobs and empty stacker.