Xerox DocuColor 6060, Operator'S Manual

Page: 232 / 340

D
O C U
C
O L O R
6 0 6 0 O
P E R A T O R
M
A N U A L
5-30
A
C C E S S O R I E S
Control Panel
Figure 26. EHCS Control Panel
5
8
9
7
6
1
2
3
4
Name Function
1 Ready light The Ready light blinks during initialization and is constant when the EHCS
is in use or in standby mode.
2 Sample set
button Press to have the EHCS deliver the next collated set to the top tray.
3 Unload
button Press once to lower the Stacker Tray and unlock the front door. If pressed
while running a job, all sheets in the paper path are delivered before the
Stacker Tray starts to lower.
4 Unload light Illuminates when the Stacker Tray has reached the down position and the
front door can be opened.
5 Wait light Blinks when the Stacker Tray is moving up or down.
6 Fault code
display Refer to the fault code table later in this section.
7 Top tray jam
area Blinks when there is a jam.
8 Bypass jam
area Blinks when there is a jam.
9 Stacker tray
jam area Blinks when there is a jam or the door is open.
Keypad Used by the service representative for diagnostics (not shown). The
keypad is located on the front right of the control panel.