Xerox DocuColor 6060, Operator'S Manual

Page: 118 / 340

D O C U C O L O R
6 0 6 0
O P E R A T O R M A N U A L
4-14
S
C A N N E R
Color Mode
Auto
The Auto feature, located in the Color Mode column on the Basic Features
screen, enables the DocuColor 6060 to automatically sense if the original
document is in color or black and white. If the original is in color, the DocuColor
6060 automatically uses Full Color. If the original is in black and white, the
DocuColor 6060 automatically uses Black Only, which reduces color dry ink used.
Gold, silver, and fluorescent colors cannot be copied accurately. The dry inks
(toners) do not contain the metallic particles necessary to accurately reproduce
gold and silver colors or the fluorescent properties that are required to reproduce
fluorescent colors.
With the Auto Color option, some very dark colors may be sensed as black and
therefore copied as black. In these cases, select the Full Color option.
For the scanner to accurately sense the presence of color on a document during
the prescan cycle, the color area on the document must be greater than 2 inches
x 2 inches (approximately 50 mm x 50 mm). If the color area is less than 2 inches
x 2 inches (approximately 50 mm x 50 mm), select the Full Color option.
Full Color
Select the Full Color option, located in the Color Mode column on the Basic
Features screen, when the original contains color and black. In the Full Color
mode, the DocuColor 6060 uses all four colors: cyan, magenta, yellow, and black
for the output document.