WTE TReX-460, User Manual

Page: 89 / 302

TReX User Manual v15.30 Firmware
MATCH Sub-Menu
The MATCH sub-menu is used to configure and view serial match strings. When these strings
are identified as part of an incoming serial stream, the associated work bit can be set and used
as part of a PLC program.
See PLC Support .
There are 4 serial match strings that can be configured.
MATCH:
The serial input match string being edited (1-4)
EDIT TEXT:
Access to the text editor to allow the serial input string to be viewed and modified.
WORK BIT:
This is the associated work bit (B:1-B:64) that can be set when the input string is matched.
© WTE Limited, 2022 – Christchurch New Zealand
Page 89 of 302