WTE TReX-460, User Manual

Page: 34 / 302

TReX User Manual v15.30 Firmware
To edit any field, first move to the item, press RIGHT to select the field. Once highlighted, the
UP/DOWN arrows change the field. On completion, pressing RIGHT again will deselect the
field.
Some fields are text that can be edited. There is a built-in text editor. Fields that are edited by
the text editor are presented with the title “EDIT TEXT”. This may be suitable for minor
changes where other configuration means are not available.
Each character can be selected by pressing the RIGHT button. The selected character is
inverted. Pressing the UP/DOWN buttons allows the character to be changed to any printable
character. Characters can now be selected via the text input screen.
Once a character has been selected, pressing the ENTER button accepts the change.
The BACK arrow indicates the end of the text. This arrow is not part of the actual text but
present as a marker. To make the text longer, highlight the BACK arrow and change the
character using the UP/DOWN buttons. To make the text shorter or to delete a character,
highlight the BACK arrow and press the ENTER button. Press the BACK button to exit the
editor.
© WTE Limited, 2022 – Christchurch New Zealand
Page 34 of 302