WTE TReX-460, User Manual

Page: 50 / 302

TReX User Manual v15.30 Firmware
RF Menu
!
WARNING
CHANGING RF PARAMETERS WITHOUT AUTHORISATION MAY RESULT IN
PROSECUTION AND AFFECT OTHER USERS.
•
The TReX can be configured to operate on many frequencies and at many power levels. Only
use the TReX at power levels and frequencies legally permitted to do so at. If unaware of the
restrictions of use for radio transmitters in the country of use, seek professional guidance.
Failure to follow these instructions can result in local body prosecution. Misuse may affect other
radio users that may in return affect their safety when critical systems have been employed.
RF
When SIMPLEX, the TReX receiver frequency, modulation and mode are used from this menu
(common to TX). This allows common parameters to be easily changed in a single place.
When DUPLEX the TReX receiver frequency, modulation and modes are used from within the
RX menu. DUPLEX may be desired when forwarding onto another device in a different format
(such as receiving in FLEX on one frequency and transmitting in POCSAG on another).
RX_DISABLED disables all receiver functions. TX_DISABLED disables all transmitter
functions. When RX_DISABLED is selected an operating current reduction of 50mA is
typical.
© WTE Limited, 2022 – Christchurch New Zealand
Page 50 of 302