WTE TReX-460, User Manual

Page: 60 / 302

TReX User Manual v15.30 Firmware
This message is transmitted periodically depending on PERIODIC setting. The message
should match the used protocol. e.g “WT1234567A10 Periodic Message” should be
configured if the WT protocol is selected.
MSG LOG
When ENABLED all transmitted messages are logged to “TX-LOG.TXT”. It should be noted
that logging all messages to the SD card does slightly impair the performance of the
transmitter. In some cases transmitting of batched messages may not be possible at high data
rates. All messages will still be transmitted correctly, but in some cases less efficiently
(through occasional resending of a preamble between messages). This means for some
applications, especially when the TReX is not actively being managed (perhaps through being
installed at a remote site), MSG LOG should be set to DISABLED. When the SD card is full,
the message “SD CARD FULL” will be displayed until acknowledged. Operation will
continue normally after the SD card is full.
DISABLED:
Messages are not logged.
ENABLED:
All messages displayed are written to internal SD card and can be viewed on the message
history screen.
CLEAR:
Setting to CLEAR will result in TX-LOG.TXT being deleted when exiting the menu.
© WTE Limited, 2022 – Christchurch New Zealand
Page 60 of 302