CdQdec=_TU
$!"
45@! C4QdQ5^dbi@Q^U\
- To return to the Network Status display, press
.
• To clear all of the network status counters, press
.
Caution:
This information is displayed as an aid to troubleshoot
communications on the MedLAN network and should be
cleared or reset only by qualified personnel. Refer to the
appropriate MedLAN documentation for additional assistance.
• To select the network polling option for Optimize or
Monitor mode, press
.
- OPTIMIZE tells the network to poll only the
WCUs that were on-line when you selected
Optimize mode (or when the DEP-100S is reset).
This speeds communications because the
network does not wait for a response from
inactive devices, and each WCU is polled more
frequently.
- MONITOR resumes normal polling (all the
devices are polled).
• To display the revision numbers of all of the hardware
and software, press
. You’ll see a new menu to
select the Revision Status (
) or the Hardware
Status (
).
- Press
to select revision status, and you’ll see
a display showing the hardware and software
revision numbers of the DEP-100S and every
WCU.
- Press the
E
key to see all of the WCUs on the
network.
- Press
to return to the Status Mode display.
• To see the network status of additional conditions,
press the
W
and
E
keys. The following briefly
describes all of the error conditions on the network
status display.
