CdQdec=_TU
45@! C4QdQ5^dbi@Q^U\
$)
From the example shown on the previous page, WCUs #00 and 01
generated an END OF STEPPER Fault. The LOW CURRENT
LIMIT Fault was detected at WCUs #00, 01, 04 and 07.
• To clear all faults on all the weld controls, press
.
• To see additional WCUs where faults were detected,
press
.
• To return to the Fault Status menu, press
.
4
9C@<1I
1
<5BDC
The Display Alerts option displays the alert conditions detected.
If no alerts were detected, you’ll see a message saying that no
ALERTs were present. The display shows the type of alert,
followed by a list of any weld controls generating an alert.
• To clear all of the alerts on all of the weld controls,
press
.
• To see additional controls where alerts were detected
if the display shows (more), press
.
• To return to the Fault Status menu, press
.
88D" 3?==?>
CD1BD?61<5BDC
CD5@@5B1@@B?1389>7=1H* $ )
S\UQb]U^e
6!6"6#6$
