@b_WbQ]=_TU
"$
45@! C4QdQ5^dbi@Q^U\
@b_WbQ]QGU\TCSXUTe\U
When a weld schedule is displayed, you can insert or delete a
function into the schedule, or change the programmable values
for a function.
You can only change the weld schedules for the selected weld
control unit. Make certain the correct WCU is selected and the
correct weld schedule for that WCU is displayed before you
make any programming changes.
9
>C5BD
1
6
E>3D9?>
The INSERT key adds a weld function to a schedule. The new
function is inserted below the line where the cursor appears.
1. Use the
W
and
E
keys to move the cursor
2. Press
INSERT
3. The display prompts you, asking for the function you
want to insert.
There are two ways to insert a function
• Select Function Type
• Enter Function Code
CU\USd6e^SdY_^Di`UEcY^W6e^SdY_^;Uic*
If you do not know the number of the function you want to
insert, you can use a function key (
delay,
weld or
special functions) to move through the function list.
For example, pressing
, shows a list of delay functions. These
functions all tell the weld timer to wait without providing weld
current. Now use the
W
and
E
keys to move through the list of
delay functions. Press
-
when the cursor is next to the function
you want to insert.
When you press
-
, the function is inserted into the weld
sequence with the cursor under the first programmable value for
the function. Enter the number of cycles to delay and press
-
again.