@b_WbQ]=_TU
45@! C4QdQ5^dbi@Q^U\
"%
Note:
The list of functions available will depend on the software
in the appropriate weld control unit (wcu). Refer to the
Operator’s Manual provided for the weld device to
determine the list of functions and their 2-digit codes.
5^dUb6e^SdY_^3_TU*
If you know the 2-digit function code assigned to a function, type
the function number and press
-
. The function is displayed in
the schedule with the cursor under the first programmable value
for that function.
When you insert a weld function, you can program both the
number of cycles to weld and the amount of heat to apply during
the weld cycles. The cursor is under the number of cycles (the
first value).
Use the numeric keys to enter the number of cycles to weld, then
press
-
. The cursor moves to the weld heat value. Enter the %
heat, and press
-
again.
4
5<5D5
1
6
E>3D9?>
6
B?=
1
C
3854E<5
To delete a function from a sequence, use the
W
and
E
keys to
scroll the weld sequence until the cursor is next to the function
you want to delete.
Now press
DELETE
and the function is removed.
3
81>75
6
E>3D9?>
F
1<E5C
To change the values programmed for a function, use the
W
and
E
keys to scroll the schedule until the cursor is next to the
function you want to change.
Now press the
U
and
O
keys to move the cursor to the value
you want to change. When the blinking cursor is on the value,
use the number keys to enter the new value and press
-
.
