@b_WbQ]=_TU
"(
45@! C4QdQ5^dbi@Q^U\
Note:
The Review Stepper function is used only to program the
stepper profile or stepper parameters. To advance, reset,
or turn on or off a stepper, use the Stepper Status display,
described on page 4-2.
The stepper settings determine when current is added and the
amount of current to add. When you select REVIEW STEPPER,
you’ll see a menu to program the stepper settings.
Note:
If the weld control does not provide a SureWeld stepper,
option #2 does not appear on the Review Stepper menu.
Use the number keys to select the stepper type you want to
review. Press
or
to select a stepper option. Each option is
described in the following sections.
B
5F95G
<
9>51B
C
D5@@5B
When you press
, you’ll see the linear stepper profile that was
defined for the selected WCU. (An example display, for stepper
#01 of wcu #00, is shown below.)
88D" 3?==?>
!BUfYUg<Y^UQbCdU``Ub
"BUfYUgCebUGU\TCdU``Ub
6!6"6#6$
88D" 3?==?>
CD1BD?6CD5@@5B
OCD5@ ! " !% 1=@C % G5<4C
CD5@ " # !% 1=@C ! G5<4C
gSe cd`b !T_g^\_QTUhYd
6!6"6#6$
