@b_WbQ]=_TU
45@! C4QdQ5^dbi@Q^U\
"#
BUfYUgCSXUTe\U
The Review Schedule function is used to program a weld
schedule by adding or deleting functions, or by changing the
value programmed for a function.
When you press
from the Program Mode display, you’ll see
weld schedule #1 for the device selected.
In this example, the display shows the start of weld schedule #1
(
cSX
#01
) for wcu #15. The options on this display select the
following features:
• Press
to change the WCU selected.
For example, to see WCU #10, press
and then use
the number keys to enter 10. When you press
-
,
you’ll see schedule #01 for WCU #10.
• Press
to change the schedule number displayed.
• Press
to download the new weld schedule data to
the weld control selected.
• Press
to return to the Program Mode.
When you see the weld schedule you want to edit, use the
W
and
E
keys to see all of the functions in a weld schedule.
When you see the message
END OF SCHEDULE
, you have seen
all of the functions in that schedule. Press the
E
key again to
move back to the
START OF SCHEDULE
.
The DEP-100S can display only three weld functions at a time.
(The last line is reserved to define the soft keys.) As you scroll
through the schedule, the cursor remains to the left of the second
line of the display.
88D" 3?==?>
CD1BD?6C3854E<5
ODEB>?>G5<49>@B?7B5CC
DEB>?>9C?<1D9?>3?>D13D?B
gSe!%cSX !T_g^\_QTUhYd
6!6"6#6$
