45@! C4QdQ5^dbi@Q^U\
#!
4Yc`\Qi=_TU
#
Display Mode enables you to perform the following tasks to change a
weld schedule:
• To access a schedule’s welding data such as line voltage,
primary and secondary current and power factor.
• To adjust the squeeze, weld current, and hold times for a
schedule
• To adjust the current for a stepper.
• To change a WCU status to Weld or No Weld.
When you press the
DISPLAY MODE
key, you’ll see the following
display:
WELD DATA:
Press
to see the status of the last
weld initiated by the device selected.
(See page 3-2.)
HEAT DISPLAY:
Press
to change the amount of
weld energy provided by a schedule
without using Program Mode. (See
page 3-4.)
88D" 3?==?>
49C@<1I=?45
G5<4851DG>G
41D149C@<1ICD1DEC
6!6"6#6$
