?fUbfYUg_VdXU45@! C
45@! C4QdQ5^dbi@Q^U\
!'
If the cursor moves to the item, it blinks to tell you that it will be
changed if you enter a new value (using the number keys). When
you press
-
, the value showing on the display will be stored in
memory.
Hint:
The new value is now in DEP-100S memory, not the weld
processor memory. The new value does not affect the weld
control UNTIL you download the new setting to the weld
control.
8
?G
D?
3
81>75
1
F
1<E5
To change a value, use the arrow keys to move the cursor to the
value you want to change. (If the value is not programmable, the
cursor will not stop.)
When the cursor is in position, use the number keys to enter a
new value. The press
5
to place the value into the DEP-
100S memory.
When programming a weld schedule, move the cursor to the
programmable value, enter the value and then move the cursor to
the next value you want to change. (You do not need to press
5
.)
When you are done programming the schedule, press
to
download the new schedule to the weld control (wcu#) selected.
For example, on the weld schedule display shown above, the
cursor is on the first function in the sequence: LINEAR STEPPER
#01 ASSIGNED (0=OFF).
88D" 3?==?>
CD1BD?6C3854E<5
O<9>51BCD5@@5B !1CC97>54 -?66
C533EBB<9=9DC*89- <?))))
gSe cSX !T_g^\_QTUhYd
6!6"6#6$
