CdQdec=_TU
$!
45@! C4QdQ5^dbi@Q^U\
4
9C@<1I
9
>49F
The Display Indiv option shows a list of all of the fault or alert
conditions detected and the control(s) that generated it.
If no faults or alerts were detected, you’ll see the message ”NO
FAULTS PRESENT.”
• To clear all faults or alerts on all of the WCUs, press
.
• To see additional WCUs where faults or alerts were
detected, press
.
• To return to the Fault Status menu, press
.
4
9C@<1I
C3B
The Display SCR option displays only the faults or alerts detected
at the selected SCR.
The display shows the type of fault or alert condition, and its
status (as FAULT or ALERT), as defined in the set-up parameters.
• To clear all of the faults or alerts on the selected WCU,
press
.
• To select a different WCU for display, press
and
enter the new WCU number and press
-
.
• To return to the Fault Status menu, press
.
88D" 3?==?>
CD1BD?661E<DC
<?G3EBB5>D<9=9D* ! $ '
CD5@@5B1@@B?1389>7=1H* $ )
S\UQb]U^e
6!6"6#6$
88D" 3?==?>
C3B 61E<DC1<5BDC
<?G3EBB5>D<9=9D*61E<D
CD5@@5B1@@B?1389>7=1H*1<5BD
gSe S\UQb]U^e
6!6"6#6$
