CdQdec=_TU
$(
45@! C4QdQ5^dbi@Q^U\
4
9C@<1I
1
<<
The Display All option shows a summary of the faults and alerts
detected at every WCU. The display does not show which fault/
alert condition was detected, but shows which weld control(s)
generated either a fault or alert.
As the sample display shows, WCUs #00, 02, 03, 07 and 09 have
generated fault conditions. Alert conditions were detected at
WCUs #00, 02 and 03.
• To clear all of the faults and alerts on all of the WCUs,
press
.
• To see additional WCUs, if the display shows (more),
press
.
• To return to the Fault Status menu, press
.
4
9C@<1I
6
1E<DC
The Display Faults option shows a list of any faults detected,
followed by the number(s) of the WCU(s) that generated the fault
condition.
If no faults were detected, you’ll see a message saying that no
FAULTs were present. If there are more faults than can be
displayed at one time, the display shows (more) as
.
88D" 3?==?>
61E<DC?>G3E* " # ' )
1<5BDC?>G3E* " #
6!6"6#6$
88D" 3?==?>
CD1BD?661E<DC
<?G3EBB5>D<9=9D* ! $ '
5>4?6CD5@@5B* !
S\UQb]_bU
6!6"6#6$
