?fUbfYUg_VdXU45@! C
!!"
45@! C4QdQ5^dbi@Q^U\
After polling all 30 WCUs, the DEP-100S goes back to the first
WCU identified on the network. It asks each control to upload the
weld data stored in that control: the function list, set-up
parameters, weld schedule #1 and the stepper data programmed.
@_\\Y^W3_]`\UdUT
When the DEP-100S completes its polling, it displays the weld
data uploaded from the first WCU on the network.
The Weld Data display shows the following information from the
last weld completed at that weld control:
Caution:
This display shows the weld history for the last weld
executed. If repetitive welds are made with different
schedules, that weld data could be overwritten if the
schedule displayed is not the last one initiated.
88D" 3?==?>
<9>5FC539@63613D?B*
=1H <F
1F7 3I3cSX
<?G G3E
6!6"6#6$
