45@! C4QdQ5^dbi@Q^U\
$!
CdQdec=_TU
$
Use the Status Mode to see overall welding status information about:
• The linear or SureWeld stepper.
• The serial input or output for a weld control.
• The fault or alert conditions for a control’s set-up
parameters.
• The network communications (between the DEP-100S and
the weld control).
• The hardware and software revision numbers for the DEP-
100S and weld control.
When you press the
STATUS MODE
key, you’ll see the following
display:
The Status Mode display tells you the options you can select when you
press the corresponding keys (
–
.
STEPPER
STATUS
Press
to control the stepper. You can turn a stepper
on or off, reset, or advance the stepper from this display.
(See page 4-2.)
I/O
STATUS
Press
to see the current state of the I/O for a selected
device. (1=on, 0=off). (See page 4-6.)
88D" 3?==?>
CD1DEC=?45
CD5@@5B9?61E<D>5DG?B;
CD1DECCD1DECCD1DECCD1DEC
6!6"6#6$
