CdQdec=_TU
45@! C4QdQ5^dbi@Q^U\
$'
6Qe\dCdQdec
Press
from the Status Mode display to see the control’s fault
status.
Note:
This display is used to expand on the FAULT and ALERT
indicators on the DEP-100S. To determine which fault
condition was detected and the weld control where the fault
was generated, press the FAULT STATUS key. Then select the
appropriate display option.
The fault conditions are defined in the Operator’s Manual
provided with the weld control unit.
When you press
, the DEP-100S displays a menu to let you
select how you want to categorize the fault status information:
The options (1–5) let you select the type of information displayed,
to show only the faults, only alerts, the faults at only one weld
control (SCR) or to see all the WCUs that generated a fault.
Use the number keys to select an option and press
-
. Each
option is defined in the following section.
88D" 3?==?>
49C@<1I1<<!49C@<1I9>49F$
49C@<1I61E<DC"49C@<1IG3E%
49C@<1I1<5BDC#
cU\USd_`dY_^
6!6"6#6$
