WHILL Ci User Manual Download Page 96 | Manualshive

Page: 96 / 124

background image

94

Model Ci User Manual

5. Assembly, Adjustment, and Disassembly

5.4. Disassembly Procedures

Disassembly of the device does not require tools. When disassembling the device, pay careful

attention to the following.

For the methods of transporting the disassembled components, refer to “6.2 Transport”.

WARNING

When disassembling the front drive base and rear drive base, be sure to grasp the handle A.

There is a risk of injury caused if fingers are caught in the disassembly mechanism.

Perform disassembly in a flat, level location.

There is a risk of unexpected accident.

Do not touch the battery conectors, allow them to become wet , or bring any metal or other
foreign objects close to them.

There is a risk of injury and of damage to the device or its parts.

Be sure to remove the battery before performing disassembly.

There is a risk of electric shock and unexpected device operation. In addition, if the device is
disassembled without the battery removed, there is a risk that the device may be reset due to
metal contact with exposed connectors. If the device is reset, disconnect the battery and then
reconnect it.

CAUTION

When disassembling the device, grasp only the handle parts that are explained in this
manual, and do not hold the device by any other areas.

There is a risk of injury caused when a hand become caught in the device.

«
...
94
95
96
97
98
...
»

Summary of Contents for Ci





























































































































Reviews:

No comments

Related manuals for Ci

Brand: Yamaha Pages: 9

Brand: Yamaha Pages: 9

Brand: Yamaha Pages: 20

Brand: Yamaha Pages: 174

Brand: Yamaha Pages: 183

Brand: Yamaha Pages: 240

Brand: Gewa Pages: 16

Brand: Polyend Pages: 5

Brand: Roland Pages: 2

Brand: Roland Pages: 16

Brand: Roland Pages: 8

Brand: Roland Pages: 9

Brand: Bleeplabs Pages: 13

Brand: Stagg Pages: 8

Brand: V-Drums Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands