WHILL Ci User Manual Download Page 21

Page: 21 / 124

Model Ci User Manual

1. Safety Precautions

CAUTION

Do not use paint thinner, benzene, or other organic solvents for cleaning, and do not use a
high-pressure washer.

Doing so may result in discoloration, deformation, deterioration, and damage.

Do not insert a sharp object into the speaker holes.

Doing so may damage the control pad.

Do not disassemble the control assemblies.
Doing so may cause malfunction of the control assemblies.

Do not remove the labels.
The labels contain important information.

Do not attempt to grease the moving components or connectors of the Device.
There is a risk that the stickiness of such substances may cause sand or other foreign
substance to enter the device, causing device malfunction.

Do not drive the device at speeds of 5 mph or higher, including when the brakes are
released.
There is a risk of device malfunction.

Do not pull strongly on the USB port cap.

There is a risk of damage to the cap.

Summary of Contents for Ci





























































































































Search results

Summary of Contents for Ci

Reviews:

Related manuals for Ci

Brands by name

Popular brands

WHILL Ci, User Manual

Search results

Summary of Contents for Ci

Reviews:

Related manuals for Ci

Brands by name

Popular brands