WHILL Ci User Manual Download Page 25

Page: 25 / 124

Model Ci User Manual

1. Safety Precautions

1.2.1. General Q&A

The following are general questions and answers regarding steps to avoid the effects of EMI (electromagneticic

interference) and RFI (radio frequency interference) with this device as much as possible. Please use them as

reference.

Where do radio waves come from?

Radio waves are emitted by unidirectional or bidirectional radio devices. Such devices include

transceivers, mobile phones, wireless computer links, microwave generators, and radio call

transmitters. Radio waves are a form of electromagneticic (EM) energy, and the strength of the energy

increases at closer distances to the transmitting antenna. This electromagneticic field can cause

problems for users of electric equipment.

What kind of movements should I expect if a personal electric vehicle is affected by EMI or RFI?

EMI and RFI undergo extremely large dynamic changes and may affect a powered device depending

on conditions such as the following.

• Radio wave frequency and strength

• Structure of the power supply equipment

• Inclination of the powered device (whether the ground is flat or a slope)

• Whether or not the powered device power is turned ON and whether or not it is moving

If this device is affected, there is the possibility of abnormal movement. It may begin moving or stop

suddenly without being commanded to do so. If the source of EMI or RFI is strong, there is even the

possibility of damage to the control system.

Summary of Contents for Ci





























































































































Search results

Summary of Contents for Ci

Reviews:

Related manuals for Ci

Brands by name

Popular brands

WHILL Ci, User Manual

Search results

Summary of Contents for Ci

Reviews:

Related manuals for Ci

Brands by name

Popular brands