WHILL Ci User Manual Download Page 19

Page: 19 / 124

Model Ci User Manual

1. Safety Precautions

CAUTION

Do not touch the motor controller connectors. Do not use excessive force or speed when
removing or installing the battery.

There is a risk of damage to the battery, motor, and other components of the device.

Battery compartment

Next to rear drive base seat post

Motor controller connector

Do not place a load on the directional controller assembly or scratch it with a sharp object.

There is a risk that the directional controller assembly may become damaged, rendering the
device inoperable.

Do not throw, step on, or otherwise subject the removed control assemblies to strong
impact, and or immerse them in water.

There is a risk that the switch or directional controller assembly may become damaged,
rendering the device inoperable.

Do not scratch the display or touch it with dirty hands.

There is a risk that the display information may get unreadable.

Summary of Contents for Ci





























































































































Search results

Summary of Contents for Ci

Reviews:

Related manuals for Ci

Brands by name

Popular brands

WHILL Ci, User Manual

Search results

Summary of Contents for Ci

Reviews:

Related manuals for Ci

Brands by name

Popular brands