WHILL Ci User Manual Download Page 48

Page: 48 / 124

Model Ci User Manual

3. Charging the Battery

3.2.3. Power/charge indicator indications

The charger power/charge indicator illuminates or flashes according to the battery state as shown below.

• Flashing green: Charging

• Solid green: Charging completed

• Solid red: Standby

• Flashing red: Charging error

* Charging is not possible when the power/charge indicator is flashing red.

Disconnect the plug from the wall outlet. Then after the power/charge indicator turns off, connect

the plug again.

If the problem is still not solved, contact your distributor or WHILL Customer Support.

3.3. Checking the Charge Level of the Removed Battery

The battery charge level can be checked even when the battery is removed from the device.

Press the charge level button.

The battery charge level is indicated by the
scale on the charge level indicator.

85 - 100%

5 lamps are lit.

10 - 24%

1 lamp is lit.

Less than 10%

1 lamp flashes.

* Charge the battery

immediately.

Charge level button

Summary of Contents for Ci





























































































































Search results

Summary of Contents for Ci

Reviews:

Related manuals for Ci

Brands by name

Popular brands

WHILL Ci, User Manual

Search results

Summary of Contents for Ci

Reviews:

Related manuals for Ci

Brands by name

Popular brands