WHILL Ci User Manual Download Page 83

Page: 83 / 124

Model Ci User Manual

5. Assembly, Adjustment, and Disassembly

5.2.4. Installing the battery

WARNING

Do not touch the connectors or battery connectors, allow them to become wet , or bring any
metal or other foreign objects close to them.

There is a risk of injury and of damage to the device.

Grasp the battery handle and align the
battery with the s on the bottom of the
mounting area.

The battery weighs 6.2 lbs (2.8 kg). Be careful
not to drop it when handling it. There is a risk
of injury or damage caused by the battery
dropping.

Press the top of the battery in to install it.

If the battery cannot not be installed even
when pressing on it with some force, check
whether the battery lock is engaged.

Turn the key counter-clockwise to lock the
battery, and then remove the key.

tabs

Summary of Contents for Ci





























































































































Search results

Summary of Contents for Ci

Reviews:

Related manuals for Ci

Brands by name

Popular brands

WHILL Ci, User Manual

Search results

Summary of Contents for Ci

Reviews:

Related manuals for Ci

Brands by name

Popular brands