WHILL Ci User Manual Download Page 68

Page: 68 / 124

Model Ci User Manual

4. Operating Procedures

4.6. Releasing the Brakes

To put the device into freewheel mode, release the brake levers located below the seat assembly.

WARNING

Be sure to turn off the power before releasing the brakes.

There is a risk that the device may start moving, causing an unexpected accident.

Release the brakes only in emergencies. Do not leave the brakes released for an extended
period of time.

When the brakes are released, the device will move freely. This is extremely dangerous.

After moving the device manually with the brakes released, be sure to raise the brake
release levers and lock the brakes.

There is a risk of unexpected accident.

Never release the brakes when on a slope. Be sure to release the brakes only when in a flat
location.

There is a risk that the device may start moving, causing an unexpected accident.

Do not drive the device at speeds of 5 mph or higher, including when the brakes are
released.

There is a risk of device malfunction.

CAUTION

When moving the device after releasing the brakes, push it by hand and move it slowly.

When the brakes are released, the device will move freely. Pushing it forcefully may cause it
to move in an unexpected direction.

4.6.1. Release procedure

1. Turn off the device power.

2. Lower both brake release levers below

the seat assembly to put the device into
freewheel mode. To re-engage the brakes
and put the device back to drive mode, raise
both brake release levers.

Brake

release levers

Summary of Contents for Ci





























































































































Search results

Summary of Contents for Ci

Reviews:

Related manuals for Ci

Brands by name

Popular brands

WHILL Ci, User Manual

Search results

Summary of Contents for Ci

Reviews:

Related manuals for Ci

Brands by name

Popular brands