WHILL Ci User Manual Download Page 4

Page: 4 / 124

Model Ci User Manual

Manual Overview

This manual uses symbols such as those shown below to explain the device. Be sure to observe the instructions

indicated by each symbol.

Warning indications

Symbol

Description

WARNING

Indicates instructions which, if not observed, may result in serious injury.

CAUTION

Indicates instructions which, if not observed, may result in minor or moderate injury
or in property damage.

Symbol mark indications

Symbol

Description

Indicates a prohibited act.

Indicates that disassembly of the device may result in electric shock or other injury.

Indicates a required act.

Indicates a risk of electric shock.

Indicates a risk of rupture.

Other indications

Symbol

Description

Indicates precautions or reference information that must be read in order to prevent
device malfunctions or failures, and to ensure comfortable device use.

Summary of Contents for Ci





























































































































Search results

Summary of Contents for Ci

Reviews:

Related manuals for Ci

Brands by name

Popular brands

WHILL Ci, User Manual

Search results

Summary of Contents for Ci

Reviews:

Related manuals for Ci

Brands by name

Popular brands