WHILL Ci User Manual Download Page 104 | Manualshive

Page: 104 / 124

background image

102

Model Ci User Manual

6. Transport and Storage Methods

6.2. Transport

Pay attention to the following when transporting this device.

• When carrying device by hand, grasp the designated handles and do not hold it by any other part.

• When using public transportation, follow the rules of the public transportation agency.

WARNING

Be sure to disassemble the device before lifting it up.

The weight of the device is approximately 115 lbs (52 kg). If it is lifted up without disassembly,
there is a risk of bodily injury and/or device damage.

Be careful of the weight when lifting up each component.

There is a risk of bodily injury and/or device damage.

Do not use the device as a seat in an automobile or other vehicle.

There is a risk of damage to the device, causing an unexpected accident.

Do not lift up the device when there is a person on the device.

There is a risk of damage to the device, causing an unexpected accident.

CAUTION

When boarding an airplane, notify the airline company in advance that you will be using a
personal electric vehicle, receive an explanation of the boarding procedure, and follow the
instructions of the airline company.

Failure to notify the airline in advance may result in additional time required for the boarding
procedure.

Fasten securely when placing in an automobile trunk or similar location.

There is a risk of damage to the device.

When using a forklift to transport this device, be sure to fasten the device securely.

There is a risk of the device falling, causing damage to the device.

«
...
102
103
104
105
106
...
»

Summary of Contents for Ci





























































































































Reviews:

No comments

Related manuals for Ci

Brand: Korg Pages: 40

Brand: Yamaha Pages: 4

Brand: Yamaha Pages: 387

Brand: Simmons Pages: 13

Brand: Premier Pages: 6

Brand: Premier Pages: 32

Brand: MFB Pages: 2

Brand: MFB Pages: 11

V-drums V-tour Series

Brand: Roland Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands