WHILL Ci User Manual Download Page 53 | Manualshive

Page: 53 / 124

background image

51

Model Ci User Manual

4. Operating Procedures

WARNING

Be sure to check the following before getting into the device.

There is a risk of unexpected accident.

• Check that the brakes are not released.
• Check that the anti-tip bar is lowered.

Lowered

Raised

Check that the release levers are locked before getting into the device.

If the release levers are not locked, there is a risk of the device malfunction during use. If
it is not possible to lock the release levers, immediately discontinue use and contact your
distributor.

Before use, check that all components are properly assembled and that there are no missing
or broken parts.
If there is a component which is missing or broken, it may cause an accident or malfunction
during use.

CAUTION

Check that the arm is locked before beginning operation.

There is a risk that the arm may move during driving, causing an unexpected accident.

If any device component is lost, immediately discontinue use and contact your distributor.

There is a risk of damage to the device that renders it inoperable.

«
...
51
52
53
54
55
...
»

Summary of Contents for Ci





























































































































Reviews:

No comments

Related manuals for Ci

Brand: Simmons Pages: 20

Brand: REH4MAT Pages: 2

Brand: Virgin Musical Instruments Pages: 24

Brand: FXPANSION Pages: 180

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands