WHILL Ci User Manual Download Page 13

Page: 13 / 124

Model Ci User Manual

1. Safety Precautions

WARNING

The maximum load weight for this device is 253 lbs (115 kg). Do not subject it to a load
higher than this limit.

There is a risk of damaging the device.

Never release the brakes when on a slope. Be sure to release the brakes only when in a flat
surface.

There is a risk that the device may start moving, causing an unexpected accident.

Do not apply stickers or paint onto the rear tail light, switches, display, or labels.

There is a risk that these components may not be visible, resulting in incorrect operation and
unexpected accident.

Do not touch the battery connectors, allow them to become wet , or bring any metal or other
foreign objects close to them.

There is a risk of injury and of damage to the device or its components.

Do not remove the motor controller connectors and caps.

There is a risk that a short circuit may occur by intrusion of foreign objects, or the device may
become inoperable due to incorrect reassembly.

Do not directly touch the grease that comes from the wheels.

There is a risk of harmful effect on the skin.

Battery component

Next to rear drive base seat post

Motor controller connector

Summary of Contents for Ci





























































































































Search results

Summary of Contents for Ci

Reviews:

Related manuals for Ci

Brands by name

Popular brands

WHILL Ci, User Manual

Search results

Summary of Contents for Ci

Reviews:

Related manuals for Ci

Brands by name

Popular brands