WHILL Ci User Manual Download Page 112

Page: 112 / 124

110

Model Ci User Manual

8. Maintenance and Inspection

8.4. Inspection

It is recommended that you have it inspected approximately once evey 6 months by your distributor.

For details, consult your distributor.

8.5. Repairs, Maintenance, and Parts Replacement Performed by

the Manufacturer or Distributor

If repair, maintenance, or part replacement is necessary, contact your distributor or WHILL Customer Support.

The following maintenance can be performed by the distributors.

• Adjustment of the foot rest angle

• Adjustment of the seat length

• Adjustment of the arm position

• Replacement of the back support

• Installation of a lap belt

The following components can be removed from the device and repaired individually.

• Seat assembly

• Rear drive base

• Front drive base

• Charger (provided device)

For details, please contact your distributor or WHILL Customer Support.

WARNING

Be sure to replace the anti-tip bar if it become deformed.

There is a risk that it may lose its tip-over prevention function and the device may tip over.

CAUTION

If a part becomes worn or requires replacement, contact your distributor.

There is a risk of damage to the device that renders it inoperable.

Summary of Contents for Ci





























































































































Search results

Summary of Contents for Ci

Reviews:

Related manuals for Ci

Brands by name

Popular brands

WHILL Ci, User Manual

Search results

Summary of Contents for Ci

Reviews:

Related manuals for Ci

Brands by name

Popular brands