167
6196-2220
+CGAUTO – Automatic response to a network request for PDP
context activation, (GPRS command)
Description
The set command disables or enables an automatic positive response (auto-answer)
to the receipt of a Request PDP Context Activation message from the network.
It also provides control over the use of the V.25ter basic commands 'S0', 'A and 'H'
for handling network requests for PDP context activation.The setting does not affect the
issuing of the unsolicited result code RING or +CRING.
The test command returns values of <n> supported by the MT as a compound value.
When the +CGAUTO=0 command is received, the MT will not perform a GPRS detach
if it is attached. Subsequently, when the MT announces a network request for PDP
context activation by issuing the unsolicited result code RING or +CRING, the TE may
manually accept or reject the request by issuing the +CGANS command or may simply
ignore the network request.
When the +CGAUTO=1 command is received, the MT will attempt to perform a GPRS
attach if it is not already attached. Failure will result in ERROR or, if enabled, +CME
ERROR being returned to the TE. Subsequently, when the MT announces a network
request for PDP context activation by issuing the unsolicited result code RING or
+CRING to the TE, this is followed by the intermediate result code CONNECT.
The MT then enters V.25ter online data state and follows the same procedure as it would
after having received a +CGANS=1 with no <L2P> or <cid> values specified.
Syntax:
+CGAUTO=[<n>]
+CGAUTO?
+CGAUTO=?
Response Syntax:
OK
ERROR
Response on “+CGAUTO?”
+CGAUTO: <n>
Response on “+CGAUTO=?”
+CGAUTO: (list of supported <n>s)
Defined values:
<n>
0:
turn off automatic response for GPRS only
1:
turn on automatic response for GPRS only
2:
modem compatibility mode, GPRS only
3:
modem compatibility mode, GPRS and circuit switched calls (default)
Summary of Contents for GD-01 TCP
Page 147: ...147 6196 2220...
