104
6196-2220
Fax commands
The fax service provided by the product is class 1 compatible. However, only the core
commands defined by ITU T.31 are supported.This means that commands such as
AT+FAR, +FCC, etc. are not supported. Autobauding must be enabled to set up the prod-
uct for fax.
All set commands below return an ERROR response code if they are not
issued during communication.
+FTM – Transmit speed
Description:
This command sets the fax transmit speed.
Syntax:
AT+FTM=<speed>
Command example
Possible responses
Note
AT+FTM=? (24,48,72,73,74,96,97,98,
Test
command,
121,122,145,146)
Note: Fax 14.4 kbps
OK
supported
Defined values:
<speed>
24:
2 400 bps (modem type:V.27ter)
48:
4 800 bps (modem type:V.27ter)
72:
7 200 bps (modem type:V.29)
73:
7 200 bps (long) (modem type:V.17)
74:
7 200 bps (short) (modem type:V.17)
96:
9 600 bps (modem type:V.29)
97:
9 600 bps (long) (modem type:V.17)
98:
9 600 bps (short) (modem type:V.17)
121:
12 000 bps (long) (modem type:V.17)
122:
12 000 bps (short) (modem type:V.17)
145:
14 400 bps (long) (modem type:V.17)
146:
14 400 bps (short) (modem type:V.17)
Summary of Contents for GD-01 TCP
Page 147: ...147 6196 2220...
