108
6196-2220
Fax class 2 commands and indication messages
If the feature is supported, the coFDT, +FDR, +FET, +FPTS and +FK must be
used during communication only.
The other commands, +FBOR, +FBUF, +FCQ, +FCR, +FDCC, +FDIS, +FLID and +FPHC-
TO, cannot be used during communication.
The following messages are used to indicate DCE Responses.
They are used in communication only.
+FCON:
This response indicates connection with a fax machine.
+FDCS:<vr>,<br>,<wd>,<ln>,<df>,<ec>,<bf>,<st>:
This response reports current session capabilities.The parameters are the same than
those of AT+FDIS command
+FDIS <vr>,<br>,<wd>,<ln>,<df>,<ec>,<bf>,<st>:
This response reports remote capabilities.The parameters are the same than those of
AT+FDIS command
+FCFR:
This response indicates confirmation to receive.
+FTSI “<string>”:
This response reports the received transmit station ID string.
+FCSI “<string>”:
This response reports the received called station ID string.
+FPTS <ppr>:
This response reports received page transfer status.The parameter is the same than the
one of AT+FPTS command
+FET <ppm>:
This response reports post page message response.The parameter is the same than the
one of AT+FET command
+FHNG <cause>:
This response reports the hang-up cause. It indicates that the call has been terminated.
Summary of Contents for GD-01 TCP
Page 147: ...147 6196 2220...