112
6196-2220
+FDIS – Current sessions parameters
Description:
This command allows the DTE to parameter the capabilities used for the current ses-
sion.
Syntax:
AT+FDIS=<vr>,<br>,<wd>,<ln>,<df>,<ec>,<bf>,<st>
Command example
Possible responses
Note
AT+FDIS=? (0,1),(0-5),(0-2),(0-2),
(0-3),(0),(0),(0-7)
Fax ECM not supported
OK
Fax 14,4 kbps supported
Defined values:
This command accepts eight numeric parameters (of the T30 standard):
<vr>
Vertical Resolution,
0:
(default) Normal: 98 lpi
1:
Fine: 196 lpi
<br>
Bit Rate,
0:
2 400 bps (modem type:V.27 ter)
1:
4 800 bps (modem type:V.27 ter)
2:
7 200 bps (modem type:V.29)
3:
9 600 bps (modem type:V.29,V.17)
4*:
12 000 bps (modem type:V.33,V.17)
5*:
14 400 bps (modem type:V.33,V.17)
(*) Only when product supports 14,4 kbps data feature. If this feature is supported,
default is 5, otherwise default is 3.
<wd>
Page Width,
0:
(default) 1728 pixels in 215 mm
1:
2048 pixels in 255 mm
2:
2432 pixels in 303 mm
<in>
Page Length,
0:
A4, 297 mm
1:
B4, 364 mm
2:
(default) Unlimited
Summary of Contents for GD-01 TCP
Page 147: ...147 6196 2220...
