119
W&T
Box-to-Box
Subject to errors and modifications:
Here you activate the outputs that will be set by the
corresponding slave inputs for Binary 1 and confirm by clicking
on
Temporary Storage.
In contrast to the inputs, the outputs activated for Box-to-Box
are no longer accessible for other operation modes.
Now you still need to activate the new settings. Use the
Logout
button or select
Config >> select >> Session Control >> LogOut.
After clicking on
Save
all the settings are updated in the Web-
IO and the start page is reopened in Default User mode. The
master Web-IO can now connect to the slave Web-IO.
1
The Box-to-Box Master can only connect with the Slave if
there is no
Administrator or Operator login for
the
Slave
5.7.2 Configuring the master
m
Required access rights:
Administrator
Select in the navigation tree:
Config >> Device >> Basic Settings
>> Binary1
Summary of Contents for 57630
Page 8: ...8 W T Content...
Page 22: ...22 W T Assigning the IP address...
Page 44: ...44 W T configuring the network parameters...
Page 194: ...194 W T Diacnostics and testing...
