12
W&T
Assigning the IP address
2.1
Assigning the IP address using the WuTility-Tool
1
This method cannot be used if you do not have a PC
running under Windows and an installed TCP/IP stack.
In this case, skip to section 2.2.
The other requirements are that the Web-IO does not yet have
an IP address, i.e., the address is 0.0.0.0, and the PC is located
in the same network segment as the Web-IO.
If the Web-IO already has an IP address, change it by using one
of the other methods described in this section of by using the menu
item Config/Device/Network in the Web-based Management of the
Web-IO.
First start WuTility.exe from any desired directory on your hard
drive.
g
On our web site www.WuT.de, having selected the
Englisch language version, on the left side you find „Insi-
der search via article number“. Enter here the article no.
57630, select „Tools“ in the checkbox below and click „Go“. On
the page that will open, you select the link „WuTility“.
Click on the
icon to start the network scan.
The list of found W&T network components should now contain
an entry for the Web-IO. The IP address should be indicated as
0.0.0.0 if you are starting up for the first time. Check the
Summary of Contents for 57630
Page 8: ...8 W T Content...
Page 22: ...22 W T Assigning the IP address...
Page 44: ...44 W T configuring the network parameters...
Page 194: ...194 W T Diacnostics and testing...