49
W&T
Access types
Subject to errors and modifications:
5.1.2 Alarm service
Along with the basic operating modes, 12 various alarms can be
defined in the Web-IO The following alarm conditions can be
configured for each individual alarm:
.
Certain patterns of input and output states
.
Counter states
.
Overload errors
.
Timer interval (for cyclical alarming)
The following communication paths are available for the alarm
output:
.
SMTP (E-mail)
.
SNMP trap
.
UDP
.
TCP
5.1.3 Input /Output service
In addition to the ph
ysical properties of the inputs and outputs (See section
Con-
nections, operating elements and LEDs
) the Web-IO 12+12 Di-
gital has logic and monitoring functions.
Output groups
The outputs can be divided into groups of two or four to increase
the maximum switching current of 500mA.
1
Outputs that work in a group always switch at the same
time, even if only one output was triggered! This makes
it absolutely essential to use the outputs in a group using the
same mode.
Logic functions
The individual outputs can be controlled as a function of
configurable input patterns.
Summary of Contents for 57630
Page 8: ...8 W T Content...
Page 22: ...22 W T Assigning the IP address...
Page 44: ...44 W T configuring the network parameters...
Page 194: ...194 W T Diacnostics and testing...
