196
W&T
Firmware Update
7.1
Firmware Update
The operating software of the Web-IO is under constant
development. The following section describes how to perform
an upload for the latest firmware version.
7.1.1 Where can I get the current firmware?
g
On our web site www.WuT.de, having selected the
Englisch language version, on the left side you find „Insi-
der search via article number“. Enter here the article no.
57630, select „Firmware“ in the checkbox below and click „Go“.
On the page that will open, you select the link to the latest
firmware.
7.1.2 Firmware update over the network using WIndows
For this you will need a PC running under Windows 9x/NT/2000/
XP with a network connection and activated TCP/IP stack. For the
update process you will need two files which, as already described,
are available from the Homepage at
http://www.wut.de
.
.
The executable
WuTility
-Tool for sending the firmware to the
Web-IO
.
The file with the new firmware you want to send to the Web-IO
No special preparation of the Web-IO is necessary for performing
the firmware update.
The
WuTility
used for the update recognizes all W&T devices
located in your network and is for the most part self-explanatory. If
you do have questions or anything is unclear, please refer to the
associated documentation or use our online help.
I
Never interrupt the Update process by disconnecting the
supply voltage or pressing the Reset button. The Web-IO
will be inoperable after an incomplete
update.
Summary of Contents for 57630
Page 8: ...8 W T Content...
Page 22: ...22 W T Assigning the IP address...
Page 44: ...44 W T configuring the network parameters...
Page 194: ...194 W T Diacnostics and testing...