W&T 57630, Manual

Page: 98 / 211

98
W&T
TCP / UDP - Binary
Local Port
The local port of the Web-IO is factory set for 45889. If your
application requires a different local port for the Web-IO, enter the
desired port number in the
Local Port field.
Remote Port
Enter here the port number the UDP application communicating
with the Web-IO will use to receive data.
Remote IP Addr
Enter here the IP address of the communications partner.
Input Trigger
Check here the inputs whose state change will be used as a trigger
for sending a UDP datagram (important for event-triggered
applications).