manualshive.com logo in svg

W&T 57630, Manual

Share
Download
W&T 57630 Manual Download Page 146

146

W&T

Syslog

5.10 Syslog - Get system messages

The Web-IO can send system and error messages as well as
alarm messages to a Syslog server using the Syslog protocol.

5.10.1

Enable Syslog

m

 

Required access rights: 

Administrator

From the Web-IO navigation tree select 

Config >>  Device >>

Basic Settings >> Syslog.

Syslog Server IP:

IP address of the Syslog server to which the messages should
be sent.

Syslog Server Port

Enter here the port on which the Syslog server receives the
Syslog messages. The default is Port 514. Allowed are all UDP
ports between 1 and 65535 which are not otherwise used.

System Messages:

The Web-IO allows you to send a system message to the ente-
red Syslog server at cold- or warm start (hardware reset and Po-
wer-ON or software reset). The priority for these messages
corresponds to the 

Kernel.Info 

status.

Select 

Cold Start

 or 

Warm Start

.

Summary of Contents for 57630




















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands